Step 1

Move your furniture, vaccum-clean and cover up the floor. If you have anything hanging on your walls, we recommend filling the holes and sanding down any unwanted texture. Place your tape along the skirting board and windowsills. Make sure the tape is level, and don’t forget to press the tape closely to the wall with your fingers in order to get the best result

Step 2

Start by painting the edges and corners with your brush. Remember to always load your brush with plenty of paint to avoid streaks. Roll your roller in the paint a few times so it’s completely covered in an even layer of paint. Start rolling in W or M motions on the wall until completely covered. Let dry and repeat.

Step 3

Once you finish your second layer, remove the tape from the edges and let dry for 24 hours.

You will need

Covering (plastic/cardboard and masking tape) , paint brush and paint roller.